File: /usr/src/linux/drivers/net/wan/hd64570.h
1 #ifndef __HD64570_H
2 #define __HD64570_H
3
4 /* SCA HD64570 register definitions - all addresses for mode 0 (8086 MPU)
5 and 1 (64180 MPU). For modes 2 and 3, XOR the address with 0x01.
6
7 Source: HD64570 SCA User's Manual
8 */
9
10
11
12 /* SCA Control Registers */
13 #define LPR 0x00 /* Low Power */
14
15 /* Wait controller registers */
16 #define PABR0 0x02 /* Physical Address Boundary 0 */
17 #define PABR1 0x03 /* Physical Address Boundary 1 */
18 #define WCRL 0x04 /* Wait Control L */
19 #define WCRM 0x05 /* Wait Control M */
20 #define WCRH 0x06 /* Wait Control H */
21
22 #define PCR 0x08 /* DMA Priority Control */
23 #define DMER 0x09 /* DMA Master Enable */
24
25
26 /* Interrupt registers */
27 #define ISR0 0x10 /* Interrupt Status 0 */
28 #define ISR1 0x11 /* Interrupt Status 1 */
29 #define ISR2 0x12 /* Interrupt Status 2 */
30
31 #define IER0 0x14 /* Interrupt Enable 0 */
32 #define IER1 0x15 /* Interrupt Enable 1 */
33 #define IER2 0x16 /* Interrupt Enable 2 */
34
35 #define ITCR 0x18 /* Interrupt Control */
36 #define IVR 0x1A /* Interrupt Vector */
37 #define IMVR 0x1C /* Interrupt Modified Vector */
38
39
40
41 /* MSCI channel (port) 0 registers - offset 0x20
42 MSCI channel (port) 1 registers - offset 0x40 */
43
44 #define MSCI0_OFFSET 0x20
45 #define MSCI1_OFFSET 0x40
46
47 #define TRBL 0x00 /* TX/RX buffer L */
48 #define TRBH 0x01 /* TX/RX buffer H */
49 #define ST0 0x02 /* Status 0 */
50 #define ST1 0x03 /* Status 1 */
51 #define ST2 0x04 /* Status 2 */
52 #define ST3 0x05 /* Status 3 */
53 #define FST 0x06 /* Frame Status */
54 #define IE0 0x08 /* Interrupt Enable 0 */
55 #define IE1 0x09 /* Interrupt Enable 1 */
56 #define IE2 0x0A /* Interrupt Enable 2 */
57 #define FIE 0x0B /* Frame Interrupt Enable */
58 #define CMD 0x0C /* Command */
59 #define MD0 0x0E /* Mode 0 */
60 #define MD1 0x0F /* Mode 1 */
61 #define MD2 0x10 /* Mode 2 */
62 #define CTL 0x11 /* Control */
63 #define SA0 0x12 /* Sync/Address 0 */
64 #define SA1 0x13 /* Sync/Address 1 */
65 #define IDL 0x14 /* Idle Pattern */
66 #define TMC 0x15 /* Time Constant */
67 #define RXS 0x16 /* RX Clock Source */
68 #define TXS 0x17 /* TX Clock Source */
69 #define TRC0 0x18 /* TX Ready Control 0 */
70 #define TRC1 0x19 /* TX Ready Control 1 */
71 #define RRC 0x1A /* RX Ready Control */
72 #define CST0 0x1C /* Current Status 0 */
73 #define CST1 0x1D /* Current Status 1 */
74
75
76 /* Timer channel 0 (port 0 RX) registers - offset 0x60
77 Timer channel 1 (port 0 TX) registers - offset 0x68
78 Timer channel 2 (port 1 RX) registers - offset 0x70
79 Timer channel 3 (port 1 TX) registers - offset 0x78
80 */
81
82 #define TIMER0RX_OFFSET 0x60
83 #define TIMER0TX_OFFSET 0x68
84 #define TIMER1RX_OFFSET 0x70
85 #define TIMER1TX_OFFSET 0x78
86
87 #define TCNTL 0x00 /* Up-counter L */
88 #define TCNTH 0x01 /* Up-counter H */
89 #define TCONRL 0x02 /* Constant L */
90 #define TCONRH 0x03 /* Constant H */
91 #define TCSR 0x04 /* Control/Status */
92 #define TEPR 0x05 /* Expand Prescale */
93
94
95
96 /* DMA channel 0 (port 0 RX) registers - offset 0x80
97 DMA channel 1 (port 0 TX) registers - offset 0xA0
98 DMA channel 2 (port 1 RX) registers - offset 0xC0
99 DMA channel 3 (port 1 TX) registers - offset 0xE0
100 */
101
102 #define DMAC0RX_OFFSET 0x80
103 #define DMAC0TX_OFFSET 0xA0
104 #define DMAC1RX_OFFSET 0xC0
105 #define DMAC1TX_OFFSET 0xE0
106
107 #define BARL 0x00 /* Buffer Address L (chained block) */
108 #define BARH 0x01 /* Buffer Address H (chained block) */
109 #define BARB 0x02 /* Buffer Address B (chained block) */
110
111 #define DARL 0x00 /* RX Destination Addr L (single block) */
112 #define DARH 0x01 /* RX Destination Addr H (single block) */
113 #define DARB 0x02 /* RX Destination Addr B (single block) */
114
115 #define SARL 0x04 /* TX Source Address L (single block) */
116 #define SARH 0x05 /* TX Source Address H (single block) */
117 #define SARB 0x06 /* TX Source Address B (single block) */
118
119 #define CPB 0x06 /* Chain Pointer Base (chained block) */
120
121 #define CDAL 0x08 /* Current Descriptor Addr L (chained block) */
122 #define CDAH 0x09 /* Current Descriptor Addr H (chained block) */
123 #define EDAL 0x0A /* Error Descriptor Addr L (chained block) */
124 #define EDAH 0x0B /* Error Descriptor Addr H (chained block) */
125 #define BFLL 0x0C /* RX Receive Buffer Length L (chained block)*/
126 #define BFLH 0x0D /* RX Receive Buffer Length H (chained block)*/
127 #define BCRL 0x0E /* Byte Count L */
128 #define BCRH 0x0F /* Byte Count H */
129 #define DSR 0x10 /* DMA Status */
130 #define DSR_RX(node) (DSR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
131 #define DSR_TX(node) (DSR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
132 #define DMR 0x11 /* DMA Mode */
133 #define DMR_RX(node) (DMR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
134 #define DMR_TX(node) (DMR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
135 #define FCT 0x13 /* Frame End Interrupt Counter */
136 #define FCT_RX(node) (FCT + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
137 #define FCT_TX(node) (FCT + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
138 #define DIR 0x14 /* DMA Interrupt Enable */
139 #define DIR_RX(node) (DIR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
140 #define DIR_TX(node) (DIR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
141 #define DCR 0x15 /* DMA Command */
142 #define DCR_RX(node) (DCR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
143 #define DCR_TX(node) (DCR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
144
145
146
147
148 /* Descriptor Structure */
149
150 typedef struct {
151 u16 cp; /* Chain Pointer */
152 u32 bp; /* Buffer Pointer (24 bits) */
153 u16 len; /* Data Length */
154 u8 stat; /* Status */
155 u8 unused2;
156 }__attribute__ ((packed)) pkt_desc;
157
158
159 /* Packet Descriptor Status bits */
160
161 #define ST_TX_EOM 0x80 /* End of frame */
162 #define ST_TX_EOT 0x01 /* End of transmition */
163
164 #define ST_RX_EOM 0x80 /* End of frame */
165 #define ST_RX_SHORT 0x40 /* Short frame */
166 #define ST_RX_ABORT 0x20 /* Abort */
167 #define ST_RX_RESBIT 0x10 /* Residual bit */
168 #define ST_RX_OVERRUN 0x08 /* Overrun */
169 #define ST_RX_CRC 0x04 /* CRC */
170
171 #define ST_ERROR_MASK 0x7C
172
173 #define DIR_EOTE 0x80 /* Transfer completed */
174 #define DIR_EOME 0x40 /* Frame Transfer Completed (chained-block) */
175 #define DIR_BOFE 0x20 /* Buffer Overflow/Underflow (chained-block)*/
176 #define DIR_COFE 0x10 /* Counter Overflow (chained-block) */
177
178
179 #define DSR_EOT 0x80 /* Transfer completed */
180 #define DSR_EOM 0x40 /* Frame Transfer Completed (chained-block) */
181 #define DSR_BOF 0x20 /* Buffer Overflow/Underflow (chained-block)*/
182 #define DSR_COF 0x10 /* Counter Overflow (chained-block) */
183 #define DSR_DE 0x02 /* DMA Enable */
184 #define DSR_DWE 0x01 /* DMA Write Disable */
185
186 /* DMA Master Enable Register (DMER) bits */
187 #define DMER_DME 0x80 /* DMA Master Enable */
188
189
190 #define CMD_RESET 0x21 /* Reset Channel */
191 #define CMD_TX_ENABLE 0x02 /* Start transmitter */
192 #define CMD_RX_ENABLE 0x12 /* Start receiver */
193
194 #define MD0_HDLC 0x80 /* Bit-sync HDLC mode */
195 #define MD0_CRC_ENA 0x04 /* Enable CRC code calculation */
196 #define MD0_CRC_CCITT 0x02 /* CCITT CRC instead of CRC-16 */
197 #define MD0_CRC_PR1 0x01 /* Initial all-ones instead of all-zeros */
198
199 #define MD0_CRC_NONE 0x00
200 #define MD0_CRC_16_0 0x04
201 #define MD0_CRC_16 0x05
202 #define MD0_CRC_ITU_0 0x06
203 #define MD0_CRC_ITU 0x07
204
205 #define MD2_NRZI 0x20 /* NRZI mode */
206 #define MD2_LOOPBACK 0x03 /* Local data Loopback */
207
208 #define CTL_NORTS 0x01
209 #define CTL_IDLE 0x10 /* Transmit an idle pattern */
210 #define CTL_UDRNC 0x20 /* Idle after CRC or FCS+flag transmition */
211
212 #define ST0_TXRDY 0x02 /* TX ready */
213 #define ST0_RXRDY 0x01 /* RX ready */
214
215 #define ST1_UDRN 0x80 /* MSCI TX underrun */
216
217 #define ST3_CTS 0x08 /* modem input - /CTS */
218 #define ST3_DCD 0x04 /* modem input - /DCD */
219
220 #define IE0_TXINT 0x80 /* TX INT MSCI interrupt enable */
221 #define IE1_UDRN 0x80 /* TX underrun MSCI interrupt enable */
222
223 #define DCR_ABORT 0x01 /* Software abort command */
224 #define DCR_CLEAR_EOF 0x02 /* Clear EOF interrupt */
225
226 /* TX and RX Clock Source - RXS and TXS */
227 #define CLK_BRG_MASK 0x0F
228 #define CLK_LINE_RX 0x00 /* TX/RX clock line input */
229 #define CLK_LINE_TX 0x00 /* TX/RX line input */
230 #define CLK_BRG_RX 0x40 /* internal baud rate generator */
231 #define CLK_BRG_TX 0x40 /* internal baud rate generator */
232 #define CLK_RXCLK_TX 0x60 /* TX clock from RX clock */
233
234 #endif
235